Matched Hybrid Tees (QJH series)

  • Broadband Operation
  • High Isolation
  • Low Insertion Loss
  • Low VSWR
Matched-Hybrid-Tees 2

QuinStar Technology's QJH series of matched hybrid tees (magic tees) cover the frequency range of 18 to 170 GHzin nine waveguide bands. These four-port devices are used for balanced power-combining and/or dividing RFsignals over a broad bandwidth. Matched hybrid Tee contains four ports: an H-plane port, an E-plane port, and two co-linear ports, as shown in the outline drawing. A signal entering the H-plane port will be equally to the two collinear ports, but not to the E-plane port. The output signals coupled to the two co-linear ports are in phase. Similarly, a signal applied to the E-plane port will divide equally into the two co-linear ports. However, the output signal will be180 degrees out of phase with each other. If two signals of equal amplitude are applied to the co-linear ports, the signals will be coupled to the E-and H-plane ports. The amount of power combined at the E and H-plane ports depends on the relative phase relationship between the two input signals as follows:PH / PE = [cos (phi/2)/ sin(phi/2)]2, where phi is the relative phase difference between the two input signals. Hence, if the two signals are in phase, the total power will be combined at H-plane port. If the two signals are 180 degrees out of phase, the total power will appear at E-plane port. The isolation between the co-linear ports is greater than 20 dB, and between the E-plane and H-plane ports is greater than 30 dB. Typical applications for these tees include power dividers/combiners, bridge circuits, balanced mixers, amplifiers, and instrumentation setups. QuinStar can provide custom 4- or 8-way power dividers by combining several hybrid tees (power dividers) into a single housing. It is also possible to configure the hybrid junctions to achieve unequal power split in 3, 5, 6, or 7 ports. QuinStar Technology can also supply custom configurations (“folded tees”) with output ports in different locations than in the standard product. Other power dividers (short slot hybrids and “rat-race” hybrids) are also available as special orders. If your application requires a unique power division scheme, please contact QuinStar with your requirements.

Model Number:
QJH - A B CD 00

If you have any questions please call 310.320.1111 or email